|
 |
Pocket-Sized pH Meter
pH600
Manufactured by Milwaukee Instruments
BRAND
NEW - IN PACKAGE
Batteries Included
*FREE
Calibration Buffer Solution Included
|
pH
7.01 Buffer Solution INCLUDED
FREE !!!
Pre-mixed - Ready for use when you are.
With your purchase
of this pH meter we will include a free packet of 7.01 buffer
solution. Each packet contains 20 ml of pre-mixed, ready to use
buffer solution.
A $4.95 Value -
Yours Absolutely Free! |
 |
|
Regular Retail Price $38.95
BUY IT HERE
~ ONLY $24.95
This Milwaukee Instruments Digital pH
Meter is The Most Popular pH Meter for Use in Schools,
Pools, Salt/Freshwater Aquariums,
Gardening and all other water applicable media. At the cost of just
a few rolls of litmus paper, you can have one of the industry's best pH
testers. The pH600 supplies you with fast accurate readings on a large
easy-to-read LCD. The pH600 is fast, accurate, lightweight and pocket-sized
making it a valuable instrument for students and others alike. Testing pH
values has never been easier!
Features:
The pH600 supplies you with fast and accurate readings on
a large LCD. Calibration is simply, using only1 calibration solution and the
included screwdriver to turn the trimmer screw.
Applications:
Testing Soil:
The pH600 cannot determine the pH of soil directly. You should mix 2 parts
of distilled water with 1 part of soil. Stir the mixture and allow the soil
to settle. Then test the water to get the pH value of your soil.
Spec Summary:
-
Measurement Range
- 0.0 to 14.0 pH
-
-
Resolution
- 0.1 pH
-
-
Excellent Accuracy
- +/- 0.2 pH
-
-
Battery Type / Life
- 3X1.5V (INCLUDED)
- approx. 700 hrs. continuous use
-
-
Calibration
- Manual 1 point through trimmer
using a 7.0 buffer solution (INCLUDED)
Environment - 32 to 122°F (0 to 50°C); RH 95%
-
-
Dimensions
- 150 x 30 x 24mm
-
-
Weight
- 85 grams
|
 |
Easy To
Use
Simply push the switch to
the ON position. Stick the end of the meter into your solution. The pH
will be shown in the easy to read LCD display.
Calibration
Even though each meter is calibrated
at the factory and checked for quality, You should check the calibration
of your pH meter before using it for the 1st time. Simply cut off the top
of the calibration packet, turn on your meter and insert it into the
packet. Stir it to remove any air bubbles on the electrode. Use the small
screwdriver to turn the trimmer screw on the back of your meter until the
display shows 7.0. Rinse the meter in tap water and it's ready to use. For
the most accurate readings, you should check the calibration before each
use.
Maintenance
The probe (small glass bulb on the
tip of the tester) should be kept wet when not in use. Fill the cap with
some regular tap water to keep the probe wet. All pH probes use a cloth
junction in the construction of the probe. This cloth is part of the
diagnostic process in reading the pH. If the cloth becomes dry the unit
will not be able to read.
These
Testers are Brand New
Milwaukee
pH600 Meter comes with
FREE 7.01 Calibration Buffer
and a calibration screwdriver
We are
selling way below retail!!
ONLY
$24.95 EACH
